| Step | | Procedure & Parts & Tools |
| 1 |
|
CHECK THE VAC HOSE FOR A TIGHT CONNECTION INTO THE SQUEEGEE Y-PIPE
|
| 2 |
|
CHECK FOR A TIGHT CONNECTION INTO THE SQUEEGEE Y-PIPE FROM THE SIDE J-HOSES
|
| 3 |
|
CHECK THE FOR A TIGHT CONNECTION FROM THE SIDE J-HOSES INTO THE SQUEEGEE ASSEMBLY
|
| 4 |
|
REMOVE THE GRAY BACK PANEL BY REMOVING THE 6 T30 SCREWS
| Torx T30 |
|
|
| 5 |
|
CHECK THE VAC HOSE CONNECTION INTO THE TANK AND CHECK THE TIGHTNESS OF THE HOSE CLAMP WITH A FLATHEAD SCREWDRIVER
| Screwdriver-flat tip |
|
|
| 6 |
|
BE SURE TO CHECK THE UNDERSIDE OF THE VAC HOSE AS IT BENDS UNDER THE PANEL, THIS WAS A KNOWN WEAK POINT ON OLDER BLACK HOSES.
|